Four measures for Asian wood doors and windows to

2022-07-22
  • Detail

The reason why the window gives off bursts of coolness is that it is caused by air leakage. So, how to solve the problem of air leakage in doors and windows? Next, Asian aluminum alloy doors and windows teach you four tricks to spend a warm winter

in winter, there is always a slight chill coming from the window, disturbing your original good temperature and good mood, which is very unpleasant. The reason why the window gives off bursts of coolness is that it is caused by air leakage. So, how to solve the problem of air leakage in doors and windows? Next, Asian aluminum alloy doors and windows teach you four tricks to spend a warm winter

different windows will have different air leakage remedies. Plastic steel doors and windows, wooden doors and windows and aluminum alloy doors and windows are very different, which should be treated for different windows

1. Dealing with the leftover problems of installation with styrofoam

first of all, it depends on whether it is the problem left by the workers' inadequate installation or the problem of the product itself. If the cause of the product is the dealer or the manufacturer, if the workers have some small problems during installation, they can be removed and reinstalled; Or first clean the gap between the window frame and the door pocket and the wall, plug it with styrofoam, then fill the gap with cement and sand, and finally repair it

2. Window gap treatment

if there is a gap between the window frame and the wall, clean the gap, fill it with styrofoam, then fill the gap with high-grade cement sand, and finally repair the finish; The air leakage between the window sash and the window frame can be considered to add sealing strips, felt strips, etc. If the gap is large, it is better to add a layer of plastic steel windows inside the original windows

3. Plastic steel windows are laminated with plastic

plastic steel windows have been used for a long time, which are easy to ventilate, and the gap at the interface is too large to bond. The best way is to paste it around the window with a sponge, and then cover the whole window with plastic. The plastic absorbs heat and is airtight, and the temperature is maintained well

4. Window layout interlayer of old windows

for double-layer old windows, the best way is to fill the gap between windows with sawdust, which can solve the moisture problem of windows and block the strongest cold air at the bottom of windows. The window seams of such windows can be sealed with kraft paper and paste to ensure airtightness and extremely high temperature

don't let the windows leak in winter. Carefully check whether there is air leakage in the windows at home. If there is a leak, you can deal with it according to the above methods

沈阳妇科医院

济南妇产医院

上海性病医院

咸阳男科医院

Copyright © 2011 JIN SHI